HP Printer Error Code 0x803c010b: Eliminate The Error With Quick Solutions

HP is a well-known tech giant in the professional market. It holds a distinct position by providing exceptional service and fast printing quality. By using this printer you can get an all-in-one printer features that can fulfill all your purposes. However, it is not free from occasional flaws like others. HP printer error code 0x803c010b is one of the common glitch faced by several users.

When this error occurs, then you will see an alert notification on the screen of the HP printer. It indicates that there is some serious issue with your HP printer. This will then restrict the printer from doing the printing job. Hence, you need to fix it immediately without spending too much time.

If you also face the same error and tired by finding the solution for this issue, then you have arrived at the right place. Here in this article, we are going to provide some amazing tips and tricks which can help you to troubleshoot this issue. Hence, you are advised to go through the article given below. So, let’s start.

What Causes the HP Printer Error Code 0x803c010b to Occur?

Before going to perform the troubleshooting hacks, it’s necessary to know the reasons behind it. It becomes easy to fix the error code 0x803c010b when you know the reason behind it. Let’s have a look at the reasons provided below:

  • If you connect your printer with the Simple Network Management Protocol, then you can face this error.
  • Furthermore, if there is any problem with the drivers of the HP printer, then it can also prevent the printer to scan or copy any document.

Now, you are aware of the probable cause of the HP printer. Hence, you just need some troubleshooting hacks to fix this issue.

Easy Hacks to Solve HP Printer Error Code 0x803c010b

There are a lot of ways to fix the HP printer error code 0x803c010b. Hence, you need to stick to the methods explained below to fix this error:

Procedure 1: Disable the Protocol

Simple Network Management Protocol or SNMP is a type of link that provides information about the data to be printed by the web. Therefore, if there is any problem with the internet connection or with the SNMP protocol, then you can also encounter the error code 0x803c010b.

Hence, you should try to disable the SNMP protocol to check if it can fix this issue. To deactivate it, you should perform the steps as follows:

Step 1:

At first, you have to move the cursor to the left bottom corner of the screen and tap on the Start logo. Then, look at the right pane of the Start menu and tap on the ‘Control Panel’ option.

Or if you prefer you can also press the X and Windows key both at the same time from the keyboard and choose the ‘Control Panel’ option from the list.

Then, go to the ‘Hardware and Sound’ section under the Control Panel window.

Step 2:

Now, you should navigate to the ‘Devices and Printers’ category. Or if you prefer, you can also hit the Q and Windows key simultaneously from the keyboard. Then, type ‘printers’ in the search bar. Then, select the ‘Devices and Printers’ option from the list.

Step 3:

Under the ‘Devices and Printers’  window, right-click on the ‘Hp printer.’ Then, select the ‘printer properties’ option and proceed to the further step.

Now, navigate to the upper left side of the screen and tap on the Ports tab. Then, select the ‘Standard TCP/IP’ port. On the next window, you should click on the ‘Configure Port’ option.

Step 4:

Next, you have to untick the box that prompts ‘SNMP Status Enabled’. Hit on the OK button. After that, you have to click on the ‘Apply’ option. Exit from the current window and restart the system to save the changes.

After that, you should try to print any document to check whether the HP printer error code 0x803c010b still appears or not. If you see that the error persists, then move on to the further solution.

Procedure 2: Uninstall and Reinstall the Printer Device

You can also fix this error by reinstalling the HP printer device. To perform this, you should follow the steps given below:

Step 1:

First, go to the Start menu and open the Control Panel. Or if you prefer, you can also use the shortcut keys.

Step 2:

Go to the ‘Hardware and Sound’ section under the Control Panel window. Tap on the ‘Device and Printer’ option.

Step3:

On the next window, you will see a complete list of the installed programs of your system. Scroll down the list and find the ‘HP Printer’ option. Right-click on it. Choose the ‘Remove Device’ option from the list. Tap on the ‘Yes’ button from the pop-up confirmation window.

Step 4:

As a result, it will uninstall the printer device from your computer. Then, remove the plug of the printer from the power supply and restart the system.

Step 5:

Wait for a few time and turn the HP printer on. After that, you have to reinstall the HP printer device by following the on-screen prompt.

Now, you should check whether the printer device has been installed properly or not.

Final Recommendation

In the above guide, we have provided two simplest ways to fix the HP printer error code 0x803c010b. Hopefully, if you implement the above ways in their given order, then it will definitely help you to put an end to this error.

After successfully performing the above ways if you still face any kinds of trouble, then you can connect with a tech expert for further assistance. In addition, you can also share your queries through the comment line given at the end of this post.

 

Leave a Comment





twenty one + = 30

Call Us Now