Quick Fix Windows I/O Device Error 0x8007045d With Amazing Tips And Tricks

Pointing on the hard drive, I/O system error 0x8007045d is one such error codes that usually occurs while trying to transfer files from one drive to another.

This error code indicates that the Windows using the transfer mode is either not available or the configuration is incorrect.

The I/O error mainly occurs due to the missing system files/registry keys, outdated software, or the wrong configuration itself.

Several users are reporting about this issue but thankfully, we have enough solutions to deal with this error.

So, if you are here for some permanent solutions to eliminate this error code, then stick to the article till the end.

In this context, we have shared all the possible and time-saving solutions to deal with this error code at the earliest.

Top-Notch Solutions to Resolve Error 0x8007045d On your Windows:

Here we are presenting all the hassle-free ways to eliminate the error code 0x8007045d at your fingertips.

You can now proceed with any of the solutions that we have discussed below to get rid of this issue.

Method 1: Perform a Restore Point to Undo the Recent System Changes

Windows System Restore allows the computer to go back in time and resolve several issues including the I/O error code 0x8007045d

Listed below are some steps that you should perform to accomplish the task.

  1. At first, switch on the computer and open the Windows Search pane from the very bottom-left side of the display.
  2. Type System Restore into the search pane and tap the Enter key to open the file.
  3. Now, click on the System Restore option and enter the password if asked.
  4. Finally, choose a Restore point from the display and tap the Continue button to finish the Restore process.

When the restore is completed, simply close all the tabs and check if the Windows error is now resolved.

If the Windows error code is still appearing on your screen, try another solution listed below.

Method 2: Start the Computer in Safe Mode

Starting the computer in Safe Mode is one of the effective ways to get rid of this error on your Windows device.

Following are some of the steps given below to do so.

  1. Turn on the computer and open the Windows Run Command from the Start Bar or by pressing the Windows + R.
  2. When the Run box opens, type “msconfig” into the Search Panel and tap the Enter key to proceed.
  3. After that, locate the Boot tab under the Boot option and click on that.
  4. Now, select the Safe Boot option from the top and tap on the OK button.
  5. When a permission box appears on the screen, select the Exit without Restart option and exit all the tabs.
  6. After that, again open the Run Command by doing the same we have mentioned in Step1.
  7. Now, type “msconfig” into the search bar and tap the Enter key to proceed with the action.
  8. Locate the Selective Startup option under the General tab and click on that.
  9. Uncheck the Load Startup items and drive to the Services tab on the next screen.
  10.  After that, tick the Hide all the Microsoft settings option and click on Disable All option.
  11. Tap the OK button and when a permission box appears, select the Restart option.
  12. When the computer turns on back, copy the files again get out of the Safe Mode.

Now, check your computer if the I/O error 0x8007045d is now resolved on your Windows device or not.

If still, you are encountering the issue or the above method fails, try out the next solution discussed below.

Method 3: Update the Device Drivers on your Computer

If the device drivers are outdated or are corrupted, then it will surely stop the Windows to transfer further files.

You need to update the device drivers. Go through the tips given below to do so.

  1. Turn on the computer and open the Device Manager from the Start Bar or by pressing the Windows + I.
  2. When the Device Manager opens, locate the problem causing driver that needs to be updated.
  3. Right-click on that application and select the Update option to proceed with the next steps.
  4. After that, click on the Yes button. This will redirect you to the browser to update the file.
  5. Now, click on the Download button and when it is over, install the application manually.

Do the same for all the affected files and restart the computer as usual when finished.

Now, see if the computer is now transferring the files successfully as earlier. If still, you are encountering the issue, try one more solution discussed below.

Method 4: Fix the I/O Device Error with the Command Prompt on your Windows

Here is another way to resolve the I/O device error or the transfer error with the Command Prompt on your Windows.

To do so, follow the steps listed in the next section.

  1. At first, you need to start the Command Prompt from the Start bar or from the Run Command pane.
  2. When the Command Prompt opens, type cmd into the Command box and tap the Enter key to go with the action.
  3. After that, locate the Run as Administrator option from the left side of the screen and click on that.
  4. Now, when a permission box opens on the next screen, click on Yes to confirm the process.
  5. Finally, keep patience and wait for a while until the process gets completed.

Now, restart the computer and detect if the I/O service or the transferring problem is now all set.

If still, you are getting the error or the file is unable to transfer yet, you can follow the next solution mentioned below.

Method 5: Transform the Registry Keys on your Windows

If you are encountering the transfer or I/O error, then there might be some issues with the Registry keys.

Hence, you need to change all the conflicted Registry keys as it can surely halt the I/O error.

Perform the steps presented below in order to complete the process.

  1. At first, you need to open the Run Command from the Windows Start page or by using the Windows + R key.
  2. When the Run Box opens on the screen, type “regedit” into the blank area and tap the Enter key.
  3. Locate the “HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControl” option on the left side of the screen and click on that.
  4. After that, right-click on any place on the empty space and choose the “DWORD (32-bit) Value” title.
  5. Click on the New option on the top of the screen and set the name as “RegistrySizeLimit”.
  6. At last, double-click the file name you have set recently and set the value as “4294967295” to complete the task.

After transforming the corrupted registry keys on your device, restart the computer and see if the Restore error is now eliminated.

Bottom Lines

Hopefully, the above methods were beneficial enough and one of the methods might help to fix I/O device error 0x8007045d.

In case, the issue still remains or the above solutions don’t act, feel free to share your queries with us in the comment section below this article. Our experts will provide some additional solutions to overcome the error.

Leave a Comment





+ 62 = sixty eight

Call Us Now